Epoxy MIO High Build Polyamide based

Micaceous Iron Oxide pigments offers high shock load protections ( Impacts). MIO Epoxy
coatings acts as a intermediate between finish coat and primer coatings. These coatings are used
in heavy structures, Marine application, coastal corridor areas and many more..
Physical Properties:
Farbe Industry MIO polyamide based coatings
Resin Type Polyamide based
Color Brown/ Grey
Weight per Liter 1.75 ± 2 grams for base
Volume Solids 84 ±3%
Dry Film Thickness : 90-120 microns depending upon the type of apply mode
Coverage Area (Theoretical ) 3-4.5 m2 / L ( Depends upon the DFT and suface)
Surface Smooth
Drying time 1-2 Hrs (Touch Dry). Hard Dry Over night
Recoating Overnight/ 1 days
Pot Life : 6- 8 Hrs

Recommended Users:
1) Structures
2) Flat sheets
3) Pipelines and Heavy duty equipments and many more

SURFACE PREPARATION
Clean the metal surface by performing the Sand blasting on the metal surface and make the surface free from oil, grease or any other foreign materials before applying Farbe Industry Red Oxide metal Primer.
Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.

Key Benefits
Gives better life for the structures
Smooth Surface
Best primer for industrial application.
Colour Range
Brown

Film Properties
Heat Resistance: can be used on heat surfaces up to 230 C
Surface Preparation and Applying Procedure
Surface of the metal have to clear properly with a process of sand blasting to remove the dust particles,
grease, oil or any other foreign particles on the metal surface. Now mix the Base and Hardener Which
is supplied in 4:1 Ratio( Base: Hardener) and Apply to the metal surface.
Film Thickness
Film Thickness will depends upon the coverage Achieved
Dry film thickness (DFT): 100-120 microns (Depending upon Solvents used as mode of apply)
Drying time
Hand Drying / touch Drying is 2-3 hours
Hard Drying / Recoat is: 6-10 hours
Coverage Capacity 4-5 Sq m/ Liter

Pot Life : 6-8 Hrs
Packing 4 and 20 Liter metal tins.

Applications
In Industries like Pharma, Chemical and Power plants for pipelines like Sulfur, Ammonia Steam Lines
and ETP Tanks etc .In Automobile Industry like Containers, Crude tankers vehicle Body etc.
In Marine like Boats and floating structures